Viewing a forum - Precision Talk

Forums | Classifieds (199) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 1139 1140 1141 1142 1143 1144 ... 1145 1146 1147 1148 1149 1150 1151 ... > Forums List -> Precision Talk

Hooking up an ITC receiver to a Smart trax system - MNCORNFARMER : 11/28/2008 11:53
- Re: Hooking up an ITC receiver to a Smart trax system - 11KR : 11/28/2008 21:58
- Re: Hooking up an ITC receiver to a Smart trax system - Applicator : 11/30/2008 12:41
  - Re: Hooking up an ITC receiver to a Smart trax system - oknotiller : 11/30/2008 13:57
    - Re: Hooking up an ITC receiver to a Smart trax system - Applicator : 12/1/2008 08:25
      - Re: Hooking up an ITC receiver to a Smart trax system - 11KR : 12/1/2008 22:13
        
        Re: Hooking up an ITC receiver to a Smart trax system - Applicator : 12/2/2008 08:13
        
        Re: Hooking up an ITC receiver to a Smart trax system - 11KR : 12/2/2008 10:45

NMEA from a GS1 not in a JD tractor - mx270a : 11/27/2008 22:16
- Re: NMEA from a GS1 not in a JD tractor - CB In The Cab : 11/28/2008 01:00
  - Re: NMEA from a GS1 not in a JD tractor - collegeboy : 11/28/2008 07:22
    - Re: NMEA from a GS1 not in a JD tractor - mx270a : 11/28/2008 11:54
    - Re: NMEA from a GS1 not in a JD tractor - KevinM : 11/29/2008 15:03
      - Re: NMEA from a GS1 not in a JD tractor - collegeboy : 11/30/2008 17:28
- Re: NMEA from a GS1 not in a JD tractor - Jacob Bolson : 11/28/2008 08:11
  - Re: NMEA from a GS1 not in a JD tractor - mx270a : 11/28/2008 11:38
- Re: NMEA from a GS1 not in a JD tractor - CB In The Cab : 11/28/2008 22:28
  - tip on getting full mileage out of SF2 grace periods - DRAW W8 : 11/28/2008 23:56
- RE: NMEA from a GS1 not in a JD tractor - KevinM : 11/29/2008 15:00
  - RE: NMEA from a GS1 not in a JD tractor - mx270a : 11/30/2008 12:57
    - RE: NMEA from a GS1 not in a JD tractor - JRND : 12/1/2008 14:32

case/ih AFS software - cainfarmer : 11/27/2008 22:13
- Re: case/ih AFS software - torn : 11/27/2008 22:25
  - Re: case/ih AFS software - cainfarmer : 11/27/2008 22:36
    - Re: case/ih AFS software - torn : 11/27/2008 23:31
- RE: case/ih AFS software - Hope : 12/4/2008 10:50

trimble agps 170 trouble - wrmccormick : 11/27/2008 21:45
- RE: trimble agps 170 trouble - DG N. AL : 11/27/2008 21:58
  - RE: trimble agps 170 trouble - wrmccormick : 11/27/2008 22:03
    - RE: trimble agps 170 trouble - DG N. AL : 11/27/2008 22:33
      - RE: trimble agps 170 trouble - wrmccormick : 11/27/2008 23:00

EZ-Steer won't stay engaged. - boog : 11/27/2008 20:56
- Re: EZ-Steer won't stay engaged. - alange : 11/27/2008 22:19
  - Re: EZ-Steer won't stay engaged. - boog : 11/28/2008 08:36
- Re: EZ-Steer won't stay engaged. - mcline : 11/28/2008 12:33
  - Re: EZ-Steer won't stay engaged. - boog : 11/28/2008 18:47
    - do you have terrain corrections when it kicks out? - evil lanky me : 11/28/2008 20:55
- RE: EZ-Steer won't stay engaged. - derf : 11/29/2008 21:37
- RE: EZ-Steer won't stay engaged. - ajgern81 : 11/29/2008 22:03
  - RE: EZ-Steer won't stay engaged. - otc509 : 11/30/2008 16:38

EZ guide 500 - Noble1 : 11/27/2008 09:54
- RE: EZ guide 500 - Don Smith : 11/27/2008 10:17

ISO compliant monitors & tractors JD & CIH - jasonswmn : 11/26/2008 18:29
- Re: ISO compliant monitors & tractors JD & CIH - mcline : 11/27/2008 09:23
  - Re: ISO compliant monitors & tractors JD & CIH - CaseFarmer : 11/27/2008 09:35
  - Re: ISO compliant monitors & tractors JD & CIH - jasonswmn : 11/27/2008 09:37
- RE: ISO compliant monitors & tractors JD & CIH - FarFlung : 11/27/2008 09:46
- Re: ISO compliant monitors & tractors JD & CIH - torn : 11/27/2008 12:45
  - Re: ISO compliant monitors & tractors JD & CIH - jasonswmn : 11/27/2008 13:16
    - Re: ISO compliant monitors & tractors JD & CIH - jasonswmn : 11/27/2008 13:52

***Attn: AgTalk users*** - dko_scOH : 11/26/2008 14:24

Precision Farmer magazine - Jacob Bolson : 11/26/2008 10:45
- Re: Precision Farmer magazine - jasonswmn : 11/26/2008 12:10
  - Re: Precision Farmer magazine - torn : 11/26/2008 12:35

Shape File to old Falcon - Dirtman : 11/26/2008 10:16
- Re: Shape File to old Falcon - mx270a : 11/26/2008 10:33
  - Re: Shape File to old Falcon - Dirtman : 11/26/2008 11:36
- RE: Shape File to old Falcon - Macy : 11/26/2008 14:46

Varible rate seed with Rowcommand?? - Zach in Ala. : 11/26/2008 09:39
- RE: Varible rate seed with Rowcommand?? - Chad H : 11/26/2008 09:51
  - Re: Varible rate seed with Rowcommand?? - jdchevy25 : 11/26/2008 11:37

More good news on ISO 11783 front. - Chad H : 11/26/2008 09:38
- RE: More good news on ISO 11783 front.? question for CB in the Cab - DRAW W8 : 11/27/2008 02:40
  - RE: More good news on ISO 11783 front.? question for CB in the Cab - Chad H : 11/27/2008 10:40
    - Re: More good news on ISO 11783 front. - torn : 11/27/2008 12:46
      - Re: More good news on ISO 11783 front. - jasonswmn : 11/27/2008 13:50
        
        Re: More good news on ISO 11783 front. - arcticjoe : 12/1/2008 22:14
        
        Re: More good news on ISO 11783 front. - Chad H : 12/1/2008 22:39

Used GPS Steering Equipment - farming : 11/26/2008 09:24
- RE: Used GPS Steering Equipment - Mmaxed : 11/26/2008 10:40
- Re: Used GPS Steering Equipment - Jacob Bolson : 11/27/2008 19:43
- Re: Used GPS Steering Equipment - DWG : 11/27/2008 20:27

Maps out of GS2 - MEM : 11/26/2008 08:55
- Re: Maps out of GS2 - CB In The Cab : 11/26/2008 13:43

? maintaining level on hillsides - Art Swannack : 11/26/2008 03:40
- Re: ? maintaining level on hillsides - Longshot : 11/26/2008 11:10
- Re: ? maintaining level on hillsides - Glenn W. : 12/1/2008 01:24
  - Re: ? maintaining level on hillsides - Art Swannack : 12/2/2008 22:53
    - Re: ? maintaining level on hillsides - Amc4life : 12/4/2008 18:39

Apex ? - steveMIfarmer : 11/25/2008 23:55
- Re: Apex ? - bmatteson : 11/26/2008 07:58
  - Re: Apex ? - steveMIfarmer : 11/26/2008 08:38
    - Re: Apex ? - borisyeltson : 11/26/2008 17:05
- Re: Apex ? - CB In The Cab : 11/26/2008 17:11

Any Garmin 16A users - Gerald_skca : 11/25/2008 22:46
- Re: Any Garmin 16A users - willmarman : 11/25/2008 23:11

Leica Free RTK Networks - IN Grain Farmer : 11/25/2008 16:03
- RE: Leica Free RTK Networks - daveb : 11/25/2008 16:16
- Re: Leica Free RTK Networks - Jacob Bolson : 11/25/2008 17:08

Integrating JD Autosteer into competitions hydraulics!?!? - RandyRo : 11/25/2008 13:54
- Re: Integrating JD Autosteer into competitions hydraulics!?!? - borisyeltson : 11/25/2008 16:33
- RE: Integrating JD Autosteer into competitions hydraulics!?!? - Jacob Bolson : 11/25/2008 17:06
  - RE: Integrating JD Autosteer into competitions hydraulics!?!? - Amc4life : 11/25/2008 20:34
    - Re: Integrating JD Autosteer into competitions hydraulics!?!? - 11KR : 11/25/2008 20:50
    - RE: Integrating JD Autosteer into competitions hydraulics!?!? - RandyRo : 11/25/2008 23:40
      - RE: Integrating JD Autosteer into competitions hydraulics!?!? - Chad H : 11/26/2008 01:49
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - 11KR : 11/26/2008 13:07
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - borisyeltson : 11/26/2008 17:08
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - Chad H : 11/26/2008 21:10
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - collegeboy : 11/28/2008 07:34
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - borisyeltson : 11/28/2008 17:22
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - collegeboy : 11/28/2008 18:49
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - borisyeltson : 12/1/2008 12:24
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - Chad H : 11/29/2008 14:12
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - borisyeltson : 11/28/2008 17:26
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - Chad H : 11/29/2008 14:10
        
        Re: Integrating JD Autosteer into competitions hydraulics!?!? - RandyRo : 11/27/2008 11:23
- Re: Integrating JD Autosteer into competitions hydraulics!?!? - precision_shop : 11/27/2008 07:29

Deere vs. Trimble again... - rollig : 11/25/2008 13:50
- Re: Deere vs. Trimble again... - torn : 11/25/2008 14:27
  - Re: Deere vs. Trimble again... - Bruno Koop : 11/26/2008 02:47
- Re: Deere vs. Trimble again... - CLLEWISON : 11/25/2008 14:59
- RE: Deere vs. Trimble again... - outlaw2u : 11/25/2008 15:38
- Re: Deere vs. Trimble again... - borisyeltson : 11/25/2008 16:36
- Re: Deere vs. Trimble again... - rollig : 11/25/2008 16:47
  - Re: Deere vs. Trimble again... - borisyeltson : 11/25/2008 16:52
  - Re: Deere vs. Trimble again... - borisyeltson : 11/25/2008 16:54
- RE: Deere vs. Trimble again... - cornfrmr : 11/25/2008 20:55
  - Re: Deere vs. Trimble again... - CaseFarmer : 11/25/2008 21:10
    - Re: Deere vs. Trimble again... - cornfrmr : 11/26/2008 07:59
      - Re: Deere vs. Trimble again... - Jacob Bolson : 11/26/2008 12:11
        
        Re: Deere vs. Trimble again... - cornfrmr : 11/26/2008 21:42
- Re: Deere vs. Trimble again... - rollig : 11/26/2008 10:28
  - Re: Deere vs. Trimble again... - Longshot : 11/26/2008 12:11
  - Re: Deere vs. Trimble again... - KDD : 11/26/2008 13:03
    - Re: Deere vs. Trimble again... - outlaw2u : 11/26/2008 13:50
      - Re: Deere vs. Trimble again... - KDD : 11/26/2008 16:15
        
        Re: Deere vs. Trimble again... - 530Quad : 11/26/2008 17:14

Green seeker VS Yara ALS - mtfarmbro : 11/25/2008 13:03
- Re: Green seeker VS Yara ALS - willmarman : 11/25/2008 22:41

Deere 2600 display capability - Virginia Veg. : 11/25/2008 12:53
- RE: Deere 2600 display capability - DRAW W8 : 11/25/2008 13:00
- RE: Deere 2600 display capability - Chad H : 11/25/2008 13:00
- Re: Deere 2600 display capability - outlaw2u : 11/25/2008 15:34
  - Re: Deere 2600 display capability - borisyeltson : 11/25/2008 16:39
    - Re: Deere 2600 display capability - Zach in Ala. : 11/25/2008 22:18
    - Re: Deere 2600 display capability - RandyRo : 11/26/2008 20:00
      - Re: Deere 2600 display capability - borisyeltson : 11/28/2008 17:44
- Re: Deere 2600 display capability - dutch : 11/25/2008 23:16

Veris Experience Anyone?? - Buckwheat : 11/25/2008 09:01
- Re: Veris Experience Anyone?? - borisyeltson : 11/25/2008 16:41
- Re: Veris Experience Anyone?? - Buckwheat : 11/26/2008 07:33
  - Re: Veris Experience Anyone?? - FRMLPLR : 11/26/2008 12:33
  - Re: Veris Experience Anyone?? - Montana Gary : 11/26/2008 20:25

Auto Farm step one - fbuoni : 11/24/2008 19:50
- Re: Auto Farm step one - willmarman : 11/24/2008 22:16
  - Re: Auto Farm step one - fbuoni : 11/24/2008 22:59
    - Re: Auto Farm step one - FRMLPLR : 11/25/2008 10:26
      - Re: Auto Farm step one - fbuoni : 11/25/2008 18:53
        
        Re: Auto Farm step one - FRMLPLR : 11/26/2008 13:02
        
        Re: Auto Farm step one - fbuoni : 11/26/2008 20:02

John Deere RTK Repeaters - jmpiersonfarm : 11/24/2008 15:27
- Re: John Deere RTK Repeaters - Mike Shimek : 11/24/2008 16:17
- Re: John Deere RTK Repeaters - Longshot : 11/24/2008 18:11
- Re: John Deere RTK Repeaters - KDD : 11/24/2008 19:54
- Re: John Deere RTK Repeaters - Bruno Koop : 11/25/2008 04:15
- Re: John Deere RTK Repeaters - SSI : 11/27/2008 05:16

SMS and UD+ question - Let's Farm! : 11/24/2008 14:33
- Re: SMS and UD+ question - torn : 11/24/2008 17:05
  - Re: SMS and UD+ question - Let's Farm! : 11/25/2008 09:25
    - Re: SMS and UD+ question - torn : 11/25/2008 10:20
      - Re: SMS and UD+ question - Let's Farm! : 11/25/2008 12:39
        
        Re: SMS and UD+ question - torn : 11/26/2008 08:36

Emailing SMS maps - Mlebrun : 11/24/2008 13:19
- RE: Emailing SMS maps - agboy : 11/24/2008 21:45

TrueTracker (YouTube Video) for "Bob980" below - dlver : 11/24/2008 11:46

How many 9 pin (serial?) cables can you plug into the back of an EZ-500 at the same time? - evil lanky me : 11/24/2008 09:09
- RE: How many 9 pin (serial?) cables can you plug into the back of an EZ-500 at the same time? - hriessen : 11/24/2008 09:17
- RE: How many 9 pin (serial?) cables can you plug into the back of an EZ-500 at the same time? - wildcat1000 : 11/24/2008 09:32
- There are two different solutions - alange : 11/24/2008 09:59
- Re: How many 9 pin (serial?) cables can you plug into the back of an EZ-500 at the same time? - jdj59d : 11/25/2008 23:15

Orthman Tracker IV and Greenstar? - Bob980 : 11/23/2008 23:20
- RE: Orthman Tracker IV and Greenstar? - dlver : 11/24/2008 08:31
  - RE: Orthman Tracker IV and Greenstar? - Bob980 : 11/24/2008 08:56
    - Re: Orthman Tracker IV and Greenstar? - borisyeltson : 11/24/2008 12:15
      - Re: Orthman Tracker IV and Greenstar? - Jacob Bolson : 11/24/2008 16:56
- RE: Orthman Tracker IV and Greenstar? - Jacob Bolson : 11/24/2008 16:59
  - Re: Orthman Tracker IV and Greenstar? - Chad H : 11/24/2008 18:07

insight irx boundry problems - mjp : 11/23/2008 18:59
- Re: insight irx boundry problems - Francis : 11/23/2008 23:24

Greenstar Harness - bcpool : 11/23/2008 11:14
- Re: Greenstar Harness - CB In The Cab : 11/23/2008 11:33
  - Re: Greenstar Harness - bcpool : 11/23/2008 13:04
  - Re: Greenstar Harness - Geoff : 11/25/2008 20:32

Pro 600 on Kinze 3500...is it possible? - Charloz24 : 11/23/2008 11:07
- Re: Pro 600 on Kinze 3400...is it possible? - torn : 11/23/2008 14:03
  - Re: Pro 600 on Kinze 3400...is it possible? - CaseFarmer : 11/25/2008 07:21
- Re: Pro 600 on Kinze 3400...is it possible? - Charloz24 : 11/25/2008 13:12
  - Re: Pro 600 on Kinze 3500...is it possible? - CaseFarmer : 11/25/2008 21:12

AgLeader Insight vs JD GS2 2600??? - Ron..NE ILL..10/48 : 11/23/2008 09:13
- Re: AgLeader Insight vs JD GS2 2600??? - mcline : 11/23/2008 09:46
  - Re: AgLeader Insight vs JD GS2 2600??? - cdeklotz : 11/23/2008 10:31
    - Re: AgLeader Insight vs JD GS2 2600??? - agboy : 11/23/2008 10:55
      - Re: AgLeader Insight vs JD GS2 2600??? - CB In The Cab : 11/23/2008 11:19
        
        Re: AgLeader Insight vs JD GS2 2600??? - outlaw2u : 11/23/2008 13:06
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Ron..NE ILL..10/48 : 11/23/2008 14:43
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - P. Huffman : 11/23/2008 17:39
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Ron..NE ILL..10/48 : 11/23/2008 18:17
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Chad H : 11/23/2008 19:30
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Jacob Bolson : 11/23/2008 21:48
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Chad H : 11/23/2008 23:08
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Ron..NE ILL..10/48 : 11/23/2008 23:03
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Chad H : 11/23/2008 23:19
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Ron..NE ILL..10/48 : 11/24/2008 06:50
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Chad H : 11/24/2008 08:55
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - P. Huffman : 11/23/2008 21:50
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Ron..NE ILL..10/48 : 11/23/2008 22:54
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - P. Huffman : 11/23/2008 23:03
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Jacob Bolson : 11/23/2008 21:45
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - P. Huffman : 11/23/2008 21:57
        Re: AgLeader Insight vs JD GS2 2600???...planter? - AlexW : 11/24/2008 09:11
        
        Re: AgLeader Insight vs JD GS2 2600???...planter?..ISO stuff - Ron..NE ILL..10/48 : 11/24/2008 11:42
        
        Re: AgLeader Insight vs JD GS2 2600???...planter?..ISO stuff - CB In The Cab : 11/24/2008 11:57
        
        Re: AgLeader Insight vs JD GS2 2600???...planter?..ISO stuff - Ron..NE ILL..10/48 : 11/24/2008 17:06
        
        Re: AgLeader Insight vs JD GS2 2600???...planter?..ISO stuff - AlexW : 11/24/2008 14:47
        
        Re: AgLeader Insight vs JD GS2 2600??? - torn : 11/24/2008 23:09
        
        Re: AgLeader Insight vs JD GS2 2600???...planter? - Jacob Bolson : 11/24/2008 17:02
        
        Re: AgLeader Insight vs JD GS2 2600??? - torn : 11/24/2008 23:06
        
        Re: AgLeader Insight vs JD GS2 2600??? - agboy : 11/24/2008 23:21
        
        Re: AgLeader Insight vs JD GS2 2600??? - torn : 11/25/2008 08:46
        
        Re: AgLeader Insight vs JD GS2 2600??? - Jacob Bolson : 11/25/2008 09:12
        
        Re: AgLeader Insight vs JD GS2 2600??? - torn : 11/25/2008 23:04
    - Re: AgLeader Insight vs JD GS2 2600??? - dutch : 11/23/2008 18:20
  - Re: AgLeader Insight vs JD GS2 2600???...swath control? - Ron..NE ILL..10/48 : 11/23/2008 14:45
    - Re: AgLeader Insight vs JD GS2 2600???...swath control? - tedbear : 11/23/2008 15:45
- RE: AgLeader Insight vs JD GS2 2600??? - SamsDad : 11/23/2008 21:52
- Re: AgLeader Insight vs JD GS2 2600??? - CB In The Cab : 11/24/2008 22:34
- CAN, ISO, and 11783 - Macy : 11/26/2008 17:10

Repeated control faults with t2 and EZ-Guide 500 - evil lanky me : 11/23/2008 08:56
- RE: Repeated control faults with t2 and EZ-Guide 500 - Jacob Bolson : 11/23/2008 09:02
  - RE: Repeated control faults with t2 and EZ-Guide 500 - moonshine : 11/23/2008 11:00
- Re: Repeated control faults with t2 and EZ-Guide 500 - mcline : 11/23/2008 09:03
  - I'll bet thats part of the deal. - evil lanky me : 11/23/2008 09:06
- Re: Repeated control faults with t2 and EZ-Guide 500 - mcline : 11/23/2008 09:08
  - Re: Repeated control faults with t2 and EZ-Guide 500 - raider2b : 11/23/2008 11:13
    - Re: Repeated control faults with t2 and EZ-Guide 500 - Buster 50 : 11/23/2008 11:20
      - Re: Repeated control faults with t2 and EZ-Guide 500 - raider2b : 11/23/2008 15:40

grain cart scale - 9wleadfoot : 11/22/2008 22:49
- Re: grain cart scale - mx270a : 11/22/2008 23:02
- RE: grain cart scale - Chad H : 11/22/2008 23:32
  - RE: grain cart scale - 9wleadfoot : 11/23/2008 00:04
    - RE: grain cart scale - Chad H : 11/23/2008 00:27
      - Re: grain cart scale - lorenk : 11/23/2008 14:12
        
        Re: grain cart scale - Chad H : 11/23/2008 14:29
      - Re: grain cart scale - nevinstobbe : 11/23/2008 15:36
        
        Re: grain cart scale - Chad H : 11/23/2008 18:47
- RE: grain cart scale - rockbottom : 11/23/2008 19:01

flowmeter on pop up fertilizer - earthman818 : 11/22/2008 21:22
- Re: flowmeter on pop up fertilizer - highline : 11/22/2008 21:23
  - Re: flowmeter on pop up fertilizer - earthman818 : 11/22/2008 21:40
    - Re: flowmeter on pop up fertilizer - highline : 11/22/2008 21:45
- Re: flowmeter on pop up fertilizer - earthman818 : 11/22/2008 21:47
- Re: flowmeter on pop up fertilizer - PhilJ : 11/22/2008 22:52
  - Re: flowmeter on pop up fertilizer - tedbear : 11/23/2008 12:01

VR Fertilizer w/ Rawson - semnjoe : 11/22/2008 18:50
- Re: VR Fertilizer w/ Rawson - PhilJ : 11/22/2008 22:56
  - Re: VR Fertilizer w/ Rawson - farminguy : 11/22/2008 23:21
    - Re: VR Fertilizer w/ Rawson - semnjoe : 11/23/2008 09:44
  - Re: VR Fertilizer w/ Rawson - semnjoe : 11/23/2008 09:43
    - Re: VR Fertilizer w/ Rawson - AdamOnt : 11/24/2008 10:52

Tru Count and GS2 - SamsDad : 11/22/2008 16:57
- Re: Tru Count and GS2 - borisyeltson : 11/22/2008 17:52
- Re: Tru Count and GS2 - jdchevy25 : 11/26/2008 11:50

Inexpensive ideas to map yields? - Jmark71 : 11/22/2008 14:58
- Re: Inexpensive ideas to map yields? - borisyeltson : 11/22/2008 15:42
  - Re: Inexpensive ideas to map yields? - lorenk : 11/22/2008 17:43
- Re: Inexpensive ideas to map yields? - IN Grain Farmer : 11/24/2008 16:21
  - Re: Inexpensive ideas to map yields? - Jmark71 : 11/24/2008 16:28
    - Re: Inexpensive ideas to map yields? - IN Grain Farmer : 11/24/2008 16:35
      - Re: Inexpensive ideas to map yields? - Jmark71 : 11/24/2008 16:51
    - Re: Inexpensive ideas to map yields? - IN Grain Farmer : 11/24/2008 17:02
      - Re: Inexpensive ideas to map yields? - Jmark71 : 11/24/2008 17:27
        
        Re: Inexpensive ideas to map yields? - IN Grain Farmer : 11/25/2008 09:28

?? on Swath Control for applying NH3 - cdeklotz : 11/22/2008 14:10
- Re: ?? on Swath Control for applying NH3 - borisyeltson : 11/22/2008 15:40
- RE: ?? on Swath Control for applying NH3 - SamsDad : 11/22/2008 16:49
  - RE: ?? on Swath Control for applying NH3 - cdeklotz : 11/22/2008 18:33
  - RE: ?? on Swath Control for applying NH3 - tedbear : 11/23/2008 12:17
    - RE: ?? on Swath Control for applying NH3 - SamsDad : 11/23/2008 19:23
      - RE: ?? on Swath Control for applying NH3 - tedbear : 11/24/2008 07:19
- Re: ?? on Swath Control for applying NH3 - CB In The Cab : 11/23/2008 10:56
  - Re: ?? on Swath Control for applying NH3 - cdeklotz : 11/23/2008 11:09
    - Re: ?? on Swath Control for applying NH3 - CB In The Cab : 11/23/2008 22:25
      - Re: ?? on Swath Control for applying NH3 - borisyeltson : 11/26/2008 17:19
- RE: ?? on Swath Control for applying NH3 - tedbear : 11/23/2008 12:35

John deere GS2 Adaptive Curve - cdeklotz : 11/22/2008 13:57
- Re: John deere GS2 Adaptive Curve - Zach in Ala. : 11/22/2008 16:36
  - Re: John deere GS2 Adaptive Curve - highline : 11/22/2008 21:28

Montana 1M DEMS or ORI's?????/ - Buckwheat : 11/22/2008 11:02

Data Management - borisyeltson : 11/22/2008 08:57
- Re: Data Management - KDD : 11/22/2008 12:45
  - Re: Data Management - lorenk : 11/22/2008 17:53
- RE: Data Management - HawksAG : 11/26/2008 09:03

Filtering Yield Data - Ben NCIA : 11/21/2008 20:43
- RE: Filtering Yield Data - trtaylor : 11/23/2008 12:51
- RE: Filtering Yield Data - Terry Griffin : 11/24/2008 11:32

EZ guide 500 - tracman : 11/21/2008 20:13
- Re: EZ guide 500 - mcline : 11/21/2008 23:49
  - Re: EZ guide 500 - tracman : 11/22/2008 07:31
    - Re: EZ guide 500 - Longshot : 11/22/2008 13:14
      - Re: EZ guide 500 - CLLEWISON : 11/24/2008 09:53
        
        Re: EZ guide 500 - rudolphus : 12/15/2008 14:54

Planting with autosteer question - CaseFarmer : 11/21/2008 18:07
- Re: Planting with autosteer question - Zach in Ala. : 11/21/2008 18:13
- RE: Agree with Zach - 40DODGE : 11/21/2008 18:21
  - RE: Agree with Zach - ZRT800 : 11/21/2008 20:26
- RE: Planting with autosteer question - Virginia Veg. : 11/21/2008 20:40
- RE: Planting with autosteer question - rbrfrm : 11/22/2008 09:49
- Re: Planting with autosteer question - KDD : 11/22/2008 13:10
- Re: Planting with autosteer question - Longshot : 11/22/2008 13:41

Lightbar - Corn on corn : 11/21/2008 15:25
- Re: Lightbar - Jacob Bolson : 11/21/2008 17:17
- Re: Lightbar - highline : 11/21/2008 19:45
- Re: Lightbar - Bernie nw ON : 11/21/2008 19:48
  - Re: Lightbar - borisyeltson : 11/22/2008 08:46
- RE: Lightbar - DG N. AL : 11/22/2008 08:54
  - RE: Lightbar - tedbear : 11/22/2008 09:13
- Re: Lightbar - KDD : 11/22/2008 13:26
  - Re: Lightbar - Jmark71 : 11/22/2008 15:10
    - Re: Lightbar - tedbear : 11/23/2008 12:45
      - Re: Lightbar - Jmark71 : 11/23/2008 19:54
- RE: Lightbar - Corn on corn : 11/23/2008 21:20

ag leader y/m - new1680 : 11/21/2008 12:44
- Re: ag leader y/m - torn : 11/21/2008 13:14

Injecting N-Serve and low temps - JohnG : 11/21/2008 08:20
- RE: Injecting N-Serve and low temps - bo42ku : 11/21/2008 08:37
  - Re: Injecting N-Serve and low temps - JohnG : 11/21/2008 08:44
- RE: Injecting N-Serve and low temps - cdeklotz : 11/21/2008 19:58

Jump to page: < 1139 1140 1141 1142 1143 1144 ... 1145 1146 1147 1148 1149 1150 1151 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)