|
Cedar Rapids, Iowa | Just a little insight for those who may use or have try to use the adaptive curve auto-steer feature in the GS2 and it not letting you because of the box being shaded!! First you must have picked Adaptive curve for your guidance setting. Then to get it to work you have to go into the GS2 Pro tab, then go to the auto steer tab on the right side which should be (B), then at the top of the screen you will see a tab saying guidance setting, pick this. The screen you will now see should have a box in the middle, to right side of the screen which says curve track setting, pick this. Next under this new screen you should see at the bottom a checked box that says REPEAT MODE, make sure you UN-CHECK this box. After this you should now be able to use adaptive curve!! Another side note is you may see a pop of screen come up everytime you pick adpative curve, which will talk about repeat mode, make sure to hit the NO button everytime. | |
|
John deere GS2 Adaptive Curve
