|
| seen this post this morning so i dug up some scrap pieces and welded them like you say is needed this it vertical down
This AC 1/8" 6011 roughly 100amps
just find some scrap pieces and practice I usually run hotter than most.. works for me
you can see the unclean material isn't as purdy but some times we have to burn through alot or rust and grease 6011 is good for that
Edited by Gambler 2/23/2011 12:12
 (point weld.jpg)
 (scrap weld.jpg)
 (rust weld.jpg)
 (3 welds.jpg)
Attachments
----------------
 point weld.jpg (40KB - 337 downloads)
scrap weld.jpg (41KB - 303 downloads)
rust weld.jpg (32KB - 297 downloads)
3 welds.jpg (52KB - 249 downloads)
| |
|
vertical welding
