Viewing a forum - Machinery Talk

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 8409 8410 8411 8412 8413 8414 ... 8415 8416 8417 8418 8419 8420 8421 ... > Forums List -> Machinery Talk

tractor to pull grain cart - dhfarmboy1066 : 10/2/2010 22:45
- RE: tractor to pull grain cart - CaseIH2388 : 10/2/2010 22:48
  - RE: tractor to pull grain cart - msb : 10/2/2010 23:54
- Re: tractor to pull grain cart - ftroop4 : 10/2/2010 22:48
- RE: tractor to pull grain cart - The Pretender : 10/3/2010 09:03
- RE: tractor to pull grain cart - Don Smith : 10/3/2010 09:58
  - RE: tractor to pull grain cart - acfarmer : 10/3/2010 10:27

Best Equipment finder sites? - GreenhouseGuy : 10/2/2010 22:42
- Re: Best Equipment finder sites? - Hayburner : 10/2/2010 23:11
- RE: Best Equipment finder sites? - Dakota Farm : 10/3/2010 08:49
- RE: Best Equipment finder sites? - Woodbeef : 10/3/2010 12:14

JD 9650 STS chaffer replacement ??? - bozranch : 10/2/2010 22:39
- RE: JD 9650 STS chaffer replacement ??? - bozranch : 10/3/2010 01:06
- Re: JD 9650 STS chaffer replacement ??? - dmax08 : 10/3/2010 01:17
- RE: JD 9650 STS chaffer replacement ??? - bozranch : 10/3/2010 21:34

1680 PTO clutch - ahay68979 : 10/2/2010 22:36
- Re: 1680 PTO clutch - John In Ontario : 10/2/2010 22:50
- RE: 1680 PTO clutch - 6.7ram : 10/2/2010 23:04
- Re: 1680 PTO clutch - nwia.farmboy : 10/2/2010 23:09
- Re: 1680 PTO clutch - 7150 : 10/2/2010 23:53
- RE: 1680 PTO clutch - bwitt : 10/2/2010 23:54
- RE: 1680 PTO clutch - Old Pokey : 10/3/2010 01:01
  - RE: 1680 PTO clutch - 7150 : 10/3/2010 01:17
  - RE: 1680 PTO clutch - dave morgan : 10/3/2010 01:25
  - second failure - nd mike : 10/3/2010 07:02

8010 road speed - dustfarms : 10/2/2010 22:29
- Re: 8010 road speed - rupert : 10/2/2010 23:56
  - Re: 8010 road speed - REDMAN2188 : 10/3/2010 09:06

1460 rotor drive pulley splines.... - chrisk1500 : 10/2/2010 22:27
- RE: 1460 rotor drive pulley splines.... - 98mxz583 : 10/2/2010 22:44
- RE: 1460 rotor drive pulley splines.... - jalopy : 10/2/2010 22:48
- Re: 1460 rotor drive pulley splines.... - chrisk1500 : 10/2/2010 22:54
- Re: 1460 rotor drive pulley splines.... - wkytob : 10/3/2010 00:34
- RE: 1460 rotor drive pulley splines.... - jdg : 10/3/2010 08:07
  - Re: 1460 rotor drive pulley splines.... - sawfly : 10/3/2010 09:57

Autoshift tandem lime truck - commissioner : 10/2/2010 22:15

New Member of the Family - BillinMN : 10/2/2010 22:09
- Re: New Member of the Family - Cross Country : 10/2/2010 23:18
- Re: New Member of the Family - blueraid : 10/3/2010 00:08
- Re: New Member of the Family - dmax08 : 10/3/2010 01:22

Tires.... question on sizes - School Of Hard Knock : 10/2/2010 22:01
- Re: Tires.... question on sizes - Essman : 10/2/2010 22:08
- Re: Tires.... question on sizes - plowboy : 10/2/2010 22:18

versatile 4700 hydrostatic drive problems - cantaffordnew : 10/2/2010 21:59
- RE: versatile 4700 hydrostatic drive problems - sdbeam : 10/3/2010 19:12
  - Re: versatile 4700 hydrostatic drive problems - scottnelsen : 10/3/2010 20:13

1660 vs 9610 - mennoboy : 10/2/2010 21:54
- Re: 1660 vs 9610 - barker4650 : 10/2/2010 22:02
  - Re: 1660 vs 9610 - dave morgan : 10/3/2010 01:35
    - Re: 1660 vs 9610 - dvswia : 10/3/2010 07:25
      - Re: 1660 vs 9610 - ILplowboy : 10/3/2010 09:28
        
        Re: 1660 vs 9610 - DevinF : 10/3/2010 09:38
        
        Re: 1660 vs 9610 - cdi : 10/3/2010 09:54
        
        Re: 1660 vs 9610 - Flinstone57 : 10/3/2010 10:02
        
        Re: 1660 vs 9610 - Kooiker : 10/3/2010 10:42
        
        Re: 1660 vs 9610 - acfarmer : 10/3/2010 11:28
- Re: 1660 vs 9610 - 560farms : 10/3/2010 11:28
- RE: 1660 vs 9610 - Newguy : 10/3/2010 11:38
- RE: 1660 vs 9610 - mennoboy : 10/3/2010 21:33

combining beans - JonnyPop : 10/2/2010 21:37
- RE: combining beans - Gambler : 10/2/2010 21:56

Axial Flow Questions (Chopper, Sieve Adjustors, etc) - schwinnj : 10/2/2010 21:35
- RE: Axial Flow Questions (Chopper, Sieve Adjustors, etc) - jdg : 10/2/2010 21:49
  - RE: Axial Flow Questions (Chopper, Sieve Adjustors, etc) - Buster 50 : 10/2/2010 23:31
- RE: Axial Flow Questions (Chopper, Sieve Adjustors, etc) - dave morgan : 10/3/2010 01:56

psi in duals - mij9600 : 10/2/2010 21:26
- Re: psi in duals - barker4650 : 10/2/2010 21:34
- Re: psi in duals - Coastal : 10/2/2010 21:38
- Re: psi in duals - nbfarms : 10/2/2010 21:57
- Re: psi in duals - CND : 10/2/2010 22:14
  - Re: psi in duals - Detroit : 10/2/2010 23:32
  - Re: psi in duals - superfarmer : 10/3/2010 08:36
- RE: psi in duals - turbo1 : 10/3/2010 09:14
  - Re: psi in duals - kfb13 : 10/3/2010 10:11
- Re: psi in duals - plowboy : 10/3/2010 13:53
  - Re: psi in duals - Ridgetop : 10/3/2010 16:08
  - Re: psi in duals - superfarmer : 10/3/2010 19:06

2000 Chevy pickup - ih1086 : 10/2/2010 21:25
- RE: 2000 Chevy pickup - Indianajones : 10/3/2010 07:47

Rebuilding quick hitch for off-sett - AR Plowboy : 10/2/2010 21:24
- Brandt hitches. - Virginia Veg. : 10/2/2010 21:33
  - Re: Rebuilding quick hitch for off-sett - AR Plowboy : 10/2/2010 22:02
    - Re: Rebuilding quick hitch for off-sett - Virginia Veg. : 10/3/2010 18:17

Mystery antenni and buttons on a government Volvo ?? - Jon Hagen : 10/2/2010 21:05
- Re: Mystery antenni and buttons on a government Volvo ?? - johnwayne360 : 10/2/2010 21:11
- Re: Mystery antenni and buttons on a government Volvo ?? - plowboy : 10/2/2010 21:17
- RE: Mystery antenni and buttons on a government Volvo ?? - Dakota Farm : 10/3/2010 08:51
  - Re: Mystery antenni and buttons on a government Volvo ?? - 65SuperSport : 10/3/2010 08:54
    - Re: Mystery antenni and buttons on a government Volvo ?? - redgreenandrust : 10/3/2010 19:19

Smoldering combine fire - notillgleaner : 10/2/2010 21:04
- Re: Smoldering combine fire - Jon Hagen : 10/2/2010 21:19
- Re: Smoldering combine fire - 7150 : 10/3/2010 00:11
- RE: Smoldering combine fire - kscropguy : 10/3/2010 11:15
- RE: Smoldering combine fire - FL Frank : 10/3/2010 22:15
- Re: Smoldering combine fire - notillgleaner : 10/4/2010 22:40

crumbler - superj : 10/2/2010 20:34
- Re: crumbler - balefire : 10/2/2010 20:54
  - Re: crumbler - boog : 10/2/2010 22:19
    - Re: crumbler - earnhart sil : 10/3/2010 08:00
      - Re: crumbler - bharzman : 10/3/2010 08:46
        
        crumbler pics - commissioner : 10/3/2010 17:37
- Re: crumbler - Bubba8010 : 10/3/2010 09:44

Case IH 1020 grain head crop divider snouts - stewartsafety : 10/2/2010 20:32

NH 996 corn head - WWT1370 : 10/2/2010 20:22
- Re: NH 996 corn head - jonnybegood : 10/2/2010 20:30
- Re: NH 996 corn head - WTW : 10/2/2010 20:32
- Re: NH 996 corn head - mmaddox : 10/2/2010 20:43
  - Re: NH 996 corn head - WWT1370 : 10/2/2010 21:20
    - Re: NH 996 corn head - mmaddox : 10/2/2010 21:42
      - Re: NH 996 corn head - WWT1370 : 10/2/2010 22:45
- Re: NH 996 corn head - hagkat : 10/2/2010 21:35

JD 9610 cab fan blower question - 57ringo : 10/2/2010 19:55
- RE: JD 9610 cab fan blower question - Little Joe : 10/2/2010 20:06
  - Re: JD 9610 cab fan blower question - 57ringo : 10/2/2010 20:19
    - Re: JD 9610 cab fan blower question - Little Joe : 10/2/2010 20:21
      - Re: JD 9610 cab fan blower question - 57ringo : 10/2/2010 20:34
        
        Re: JD 9610 cab fan blower question - deererun : 10/2/2010 20:41
- Re: JD 9610 cab fan blower question - Andover : 10/2/2010 21:08
- RE: JD 9610 cab fan blower question - BHTN : 10/3/2010 10:43
  - RE: JD 9610 cab fan blower question - johnypop : 10/3/2010 13:34
    - Re: JD 9610 cab fan blower question - 57ringo : 10/3/2010 14:34
    - For me.... - BHTN : 10/4/2010 16:30

O.K. Another DEF question. - Little Joe : 10/2/2010 19:24
- RE: O.K. Another DEF question. - farmerboy50 : 10/2/2010 19:27
  - RE: O.K. Another DEF question. - jpmill79 : 10/2/2010 20:13
  - Re: O.K. Another DEF question. - mcupps : 10/3/2010 00:02
- RE: O.K. Another DEF question. - WillB : 10/2/2010 21:14
  - RE: O.K. Another DEF question. - 6.7ram : 10/2/2010 23:16
    - RE: O.K. Another DEF question. - Jim Beam : 10/3/2010 10:30
- RE: O.K. Another DEF question. - Rich : 10/2/2010 21:54
  - Re: O.K. Another DEF question. - farmdude : 10/2/2010 21:59
    - Re: O.K. Another DEF question. - ihguy : 10/2/2010 22:22
      - Re: O.K. Another DEF question. - farmdude : 10/2/2010 22:45
        
        Re: O.K. Another DEF question. - Rich : 10/3/2010 16:30
      - Re: O.K. Another DEF question. - Rich : 10/3/2010 16:31
        
        Re: O.K. Another DEF question. - Jim Beam : 10/3/2010 22:56

CIH phasing out 6 row corn heads? - kmk : 10/2/2010 19:22
- Re: CIH phasing out 6 row corn heads? - CaseFarmer : 10/2/2010 19:41
- Re: CIH phasing out 6 row corn heads? - johnwayne360 : 10/2/2010 19:43
- RE: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 19:49
  - Re: CIH phasing out 6 row corn heads? - McCartman : 10/2/2010 20:05
    - Re: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 20:08
      - Re: CIH phasing out 6 row corn heads? - WWT1370 : 10/2/2010 20:19
        
        Re: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 20:26
        
        Re: CIH phasing out 6 row corn heads? - WWT1370 : 10/2/2010 20:31
        
        Re: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 20:38
        
        Re: CIH phasing out 6 row corn heads? - kmk : 10/2/2010 20:34
        
        Re: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 20:37
        
        Re: CIH phasing out 6 row corn heads? - mac4440 : 10/2/2010 21:11
        
        Re: CIH phasing out 6 row corn heads? - plowboy : 10/2/2010 21:14
        Re: CIH phasing out 6 row corn heads? - cocodrie : 10/2/2010 23:45
        
        Re: CIH phasing out 6 row corn heads? - Trent2520 : 10/2/2010 20:37
        Re: CIH phasing out 6 row corn heads? - agboy : 10/2/2010 20:44
      - Re: CIH phasing out 6 row corn heads? - Istumped : 10/2/2010 20:19
        
        Re: CIH phasing out 6 row corn heads? - jonnybegood : 10/2/2010 20:34
        Re: CIH phasing out 6 row corn heads? - corn&beef : 10/2/2010 20:40
        
        Re: CIH phasing out 6 row corn heads? - porksplace : 10/2/2010 21:27
        
        Re: CIH phasing out 6 row corn heads? - Kooiker : 10/2/2010 23:57
        
        Re: CIH phasing out 6 row corn heads? - johnwayne360 : 10/3/2010 08:36
      - Re: CIH phasing out 6 row corn heads? - McCartman : 10/3/2010 02:12
        
        Re: CIH phasing out 6 row corn heads? - Jim Beam : 10/3/2010 10:57
        
        Re: CIH phasing out 6 row corn heads? - McCartman : 10/3/2010 21:35
        
        Re: CIH phasing out 6 row corn heads? - Big Square : 10/3/2010 13:24
        
        Re: CIH phasing out 6 row corn heads? - plowboy : 10/3/2010 13:39
- RE: CIH phasing out 6 row corn heads? - Bobby Greif : 10/2/2010 20:36
  - RE: CIH phasing out 6 row corn heads? - dave morgan : 10/3/2010 01:41
- I don't know how soon they will quit, but - illfarmr : 10/2/2010 20:40
  - RE: I don't know how soon they will quit, but - Jacob Bolson : 10/2/2010 20:48
    - RE: I don't know how soon they will quit, but - plowboy : 10/2/2010 20:57
      - Re: CIH phasing out 6 row corn heads? - corn&beef : 10/2/2010 21:09
        
        Re: CIH phasing out 6 row corn heads? - Kooiker : 10/2/2010 23:53
        
        Re: CIH phasing out 6 row corn heads? - McCartman : 10/3/2010 02:20
        
        Re: CIH phasing out 6 row corn heads? - Kooiker : 10/3/2010 09:55
        
        Re: CIH phasing out 6 row corn heads? - Big Square : 10/3/2010 13:29
        Re: CIH phasing out 6 row corn heads? - McCartman : 10/3/2010 21:48
- RE: CIH phasing out 6 row corn heads? - msb : 10/3/2010 00:02
- RE: CIH phasing out 6 row corn heads? - Cliff SEIA : 10/3/2010 09:16
- RE: CIH phasing out 6 row corn heads? - beeker : 10/3/2010 09:28

How many would have tackled this? - agboy : 10/2/2010 19:02
- RE: How many would have tackled this? - PaKettle : 10/2/2010 19:11
- RE: How many would have tackled this? - usafarmer : 10/2/2010 19:14
  - RE: How many would have tackled this? - agboy : 10/2/2010 19:33
    - RE: How many would have tackled this? - ral76 : 10/2/2010 21:00
  - RE: How many would have tackled this? - eddie : 10/3/2010 00:20
- RE: How many would have tackled this? - eddie : 10/2/2010 19:14
  - RE: How many would have tackled this? - agboy : 10/2/2010 19:30
- Re: How many would have tackled this? - Lil' Hoss : 10/2/2010 19:21
- YTMND....... - Curt Keiser : 10/2/2010 19:32
  - RE: YTMND....... - WillB : 10/2/2010 20:39
- Re: How many would have tackled this? - plowboy : 10/2/2010 19:36
  - Re: How many would have tackled this? - agboy : 10/2/2010 19:44
    - Re: How many would have tackled this? - plowboy : 10/2/2010 19:48
      - Re: How many would have tackled this? - agboy : 10/2/2010 20:05
        
        Re: How many would have tackled this? - plowboy : 10/2/2010 20:10
        
        Re: How many would have tackled this? - agboy : 10/2/2010 20:36
        
        Re: How many would have tackled this? - ge jr : 10/3/2010 02:35
- Ride control - Gerard : 10/2/2010 20:05
- Re: How many would have tackled this? - Jacob Bolson : 10/2/2010 20:52
  - Re: How many would have tackled this? - plowboy : 10/2/2010 20:59
  - Re: How many would have tackled this? - WillB : 10/2/2010 21:12
- Your comment about hardness of the blanks - lylefarm : 10/2/2010 21:05
  - RE: Your comment about hardness of the blanks - agboy : 10/2/2010 21:13
- Now Finish it. - Rich : 10/2/2010 21:18
- RE: How many would have tackled this? - squish : 10/2/2010 21:44
  - RE: How many would have tackled this? - Rich : 10/2/2010 21:50
    - Re: How many would have tackled this? - squish : 10/2/2010 21:58
    - RE: Pretty straightfoward stuff, - 95h : 10/2/2010 23:10
      - RE: Pretty straightfoward stuff, - Rich : 10/3/2010 16:36
- RE: How many would have tackled this? - Old Pokey : 10/2/2010 21:58
- Re: How many would have tackled this? - CND : 10/2/2010 22:17
  - Re: How many would have tackled this? - bullhauler : 10/3/2010 01:34
- RE: How many would have tackled this? - twraska : 10/2/2010 22:52
- RE: How many would have tackled this? - collegeboy : 10/2/2010 23:53
- RE: How many would have tackled this? - Grasseed : 10/3/2010 01:17
- there's a difference between deciding to do it yourself and actually doing it... - JoshA : 10/3/2010 01:40
- JD convert! - farmboy99 : 10/3/2010 08:17
  - RE: JD convert! - agboy : 10/3/2010 09:29
  - RE: JD convert! - collegeboy : 10/3/2010 09:31
    - RE: JD convert! - agboy : 10/3/2010 09:35
      - Re: How many would have tackled this? - ge jr : 10/3/2010 10:53
      - RE: JD convert! - plowboy : 10/3/2010 13:57

strip till - farmermike62 : 10/2/2010 19:01
- RE: strip till - stripper : 10/2/2010 23:19
- RE: strip till - Ron..NE ILL..10/48 : 10/3/2010 06:33
- Re: strip till - Greywolf : 10/3/2010 09:46

Quick hitch ? - scott-young-gun : 10/2/2010 17:31

8700 Ford tractor 401 engine wear? - ok2farm : 10/2/2010 16:45
- RE: 8700 Ford tractor 401 engine wear? - Curt Keiser : 10/2/2010 18:46
  - RE: 8700 Ford tractor 401 engine wear? - 9400deere : 10/2/2010 20:17
    - RE: 8700 Ford tractor 401 engine wear? - Curt Keiser : 10/2/2010 20:50
- RE: 8700 Ford tractor 401 engine wear? - RodInNS : 10/3/2010 16:43

RTS-XT - barker4650 : 10/2/2010 16:11
- RE: RTS-XT - swndwheat : 10/2/2010 21:19
  - Re: RTS-XT - corndogs : 10/2/2010 21:43
    - Re: RTS-XT - swndwheat : 10/2/2010 23:04

AC 6080 - NEMOScott : 10/2/2010 15:02
- Re: AC 6080 - Jake_OH : 10/2/2010 17:20
- Re: AC 6080 - scottnelsen : 10/2/2010 19:09
- RE: AC 6080 - Trent2520 : 10/2/2010 20:49
- RE: AC 6080 - farmers_edge : 10/3/2010 08:38

Is there a demand for 500 bushel grain carts? - terry1267 : 10/2/2010 14:41
- RE: Is there a demand for 500 bushel grain carts? - Indianajones : 10/2/2010 15:21
- Re: Is there a demand for 500 bushel grain carts? - shanty : 10/2/2010 15:23
  - Re: Is there a demand for 500 bushel grain carts? - Andover : 10/2/2010 19:17
- RE: Is there a demand for 500 bushel grain carts? - dixonman : 10/2/2010 15:58
- RE: Is there a demand for 500 bushel grain carts? - Smoothlander : 10/2/2010 16:01
  - Re: Is there a demand for 500 bushel grain carts? - corn&beef : 10/2/2010 16:36
- Re: Is there a demand for 500 bushel grain carts? - McCartman : 10/2/2010 16:44
- Re: Is there a demand for 500 bushel grain carts? - MarlandS : 10/2/2010 17:04
  - Re: Is there a demand for 500 bushel grain carts? - McCartman : 10/2/2010 20:09
    - Re: Is there a demand for 500 bushel grain carts? - MarlandS : 10/2/2010 20:19
- Re: Is there a demand for 500 bushel grain carts? - mattdt : 10/2/2010 17:31
- RE: Is there a demand for 500 bushel grain carts? - Tim in WI : 10/2/2010 18:34
- RE: Is there a demand for 500 bushel grain carts? - z28_zeppelin : 10/2/2010 18:42
- RE: Is there a demand for 500 bushel grain carts? - jeff gordon : 10/2/2010 19:40
- RE: Is there a demand for 500 bushel grain carts? - NoTill1825 : 10/2/2010 22:13
  - Re: Is there a demand for 500 bushel grain carts? - 65SuperSport : 10/3/2010 09:09
    - Re: Is there a demand for 500 bushel grain carts? - dj dill : 10/3/2010 09:30
- Buy the new one and keep the old one. - Bobby Greif : 10/3/2010 10:44
  - Re: Is there a demand for 500 bushel grain carts? - ksfarmer12 : 10/4/2010 10:15

tracks - edoges : 10/2/2010 13:59
- Re: tracks - cornstalk : 10/2/2010 20:16

DOES ANYONE HAVE A SERVICE MANUAL FOR A 630 JOHN DEERE - JoshuaGA : 10/2/2010 13:59
- Re: DOES ANYONE HAVE A SERVICE MANUAL FOR A 630 JOHN DEERE - AR Plowboy : 10/2/2010 14:31
  - Re: DOES ANYONE HAVE A SERVICE MANUAL FOR A 630 JOHN DEERE - JoshuaGA : 10/2/2010 16:00
- Okay, how does this sound? - JoshuaGA : 10/2/2010 19:35
- RE: DOES ANYONE HAVE A SERVICE MANUAL FOR A 630 JOHN DEERE - JohnW : 10/2/2010 20:59
- RE: DOES ANYONE HAVE A SERVICE MANUAL FOR A 630 JOHN DEERE - twraska : 10/2/2010 23:11
- page from 50 service book... - BillNNY : 10/3/2010 10:20

7720 - lights on work setting - mbd : 10/2/2010 13:35
- RE: 7720 - lights on work setting - Little Joe : 10/2/2010 18:49

Midwest guys---- what time in AM do you start combining corn? soybeans? - jakescia : 10/2/2010 13:29
- Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - farmerkev : 10/2/2010 13:30
- Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - plowboy : 10/2/2010 13:31
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - Farmer Dale : 10/2/2010 13:39
  - Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - CaseFarmer : 10/2/2010 14:31
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - Illinois John : 10/2/2010 14:25
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - Dave Frisch : 10/2/2010 14:35
- Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - maverick1221 : 10/2/2010 14:57
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - citoriskeet : 10/2/2010 15:54
- Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - McCartman : 10/2/2010 16:47
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - lylefarm : 10/2/2010 17:59
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - pbutler : 10/2/2010 17:59
- RE: Midwest guys---- what time in AM do you start combining corn? soybeans? - Scott (OSU) : 10/2/2010 21:08
- Re: Midwest guys---- what time in AM do you start combining corn? soybeans? - boog : 10/2/2010 22:23

Loren you have email - bharzman : 10/2/2010 13:27

Draw pins------do they need to swivel?? - jakescia : 10/2/2010 13:25
- Re: Draw pins------do they need to swivel?? - plowboy : 10/2/2010 13:29
- RE: Draw pins------do they need to swivel?? - RICK NCMD : 10/2/2010 13:33
- RE: Draw pins------do they need to swivel?? - Rich : 10/2/2010 13:38
- RE: Draw pins------do they need to swivel?? - Curt Keiser : 10/2/2010 14:48
- RE: Draw pins------do they need to swivel?? - GinNB : 10/2/2010 16:17
  - Worked out that had to till ahead of applicators anyway-----disked......... - jakescia : 10/2/2010 17:29
    - RE: Worked out that had to till ahead of applicators anyway-----disked......... - plowboy : 10/2/2010 20:02

MF 8460 to cat 450 header? - sdbeam : 10/2/2010 13:15

IH 1460 wire harness? - hfarm : 10/2/2010 13:05
- Re: IH 1460 wire harness? - bad example : 10/2/2010 15:20
- RE: IH 1460 wire harness? - twraska : 10/4/2010 09:19

HELP! 7130 magnum trans - sharecropper : 10/2/2010 12:53
- RE: HELP! 7130 magnum trans - RICK NCMD : 10/2/2010 12:58
  - RE: HELP! 7130 magnum trans - sharecropper : 10/2/2010 14:12
    - Re: HELP! 7130 magnum trans - casetech : 10/2/2010 16:29

Tell me about Ford 8830 tractors - 5250JB : 10/2/2010 12:32
- RE: Tell me about Ford 8830 tractors - JohnW : 10/2/2010 12:54
- RE: Tell me about Ford 8830 tractors - Curt Keiser : 10/2/2010 14:51
- RE: Tell me about Ford 8830 tractors - JJS : 10/2/2010 19:18

9500 Loud whine in beans when cylinder full - pbutler : 10/2/2010 11:46
- RE: 9500 Loud whine in beans when cylinder full - dvswia : 10/2/2010 13:05
  - RE: 9500 Loud whine in beans when cylinder full - smokesgasman : 10/2/2010 21:21
- Re: 9500 Loud whine in beans when cylinder full - mcfarm : 10/2/2010 21:51
- Reel Drive Pump Bearing - Luke Skywalker : 10/2/2010 23:43

Automatics for semi trucks - Pat H : 10/2/2010 11:24
- Re: Automatics for semi trucks - claykin22 : 10/2/2010 12:15
- RE: Automatics for semi trucks - agboy : 10/2/2010 12:19
  - Re: Automatics for semi trucks - tommyw-5088 : 10/2/2010 12:57
    - Re: Automatics for semi trucks - salexmo : 10/2/2010 13:08
- Re: Automatics for semi trucks - commissioner : 10/2/2010 13:51
- RE: Automatics for semi trucks - Curt Keiser : 10/2/2010 14:58
  - Re: Automatics for semi trucks - sdan27 : 10/2/2010 16:18
    - Re: Automatics for semi trucks - commissioner : 10/2/2010 21:59
- RE: Automatics for semi trucks - RodInNS : 10/2/2010 16:56
  - RE: Automatics for semi trucks - redline : 10/2/2010 21:49
    - Re: Automatics for semi trucks - jdm : 10/2/2010 21:59
- Re: Automatics for semi trucks - milofarmer1 : 10/2/2010 22:33
  - Re: Automatics for semi trucks - WBR965 : 10/3/2010 01:12
  - Re: Automatics for semi trucks - RodInNS : 10/3/2010 16:39

1660 with a 466? - himie/26 : 10/2/2010 10:38
- Re: 1660 with a 466? - redgreenandrust : 10/2/2010 10:56
  - /How about - Ernie : 10/2/2010 12:50
    - Re: 1660 with a 466? - IHforever : 10/2/2010 13:24
  - Re: agree, check with a good fuel system shop. - 95h : 10/2/2010 23:23
- RE: 1660 with a 466? - wayneNWAR : 10/2/2010 22:07

Diesel Exhaust Fluid question - Lil' Hoss : 10/2/2010 10:35
- RE: Diesel Exhaust Fluid question - Jim Beam : 10/2/2010 10:37
  - Re: Diesel Exhaust Fluid question - bootsbowen : 10/2/2010 11:42
    - Re: Diesel Exhaust Fluid question - 40DODGE : 10/2/2010 11:54
      - Re: Diesel Exhaust Fluid question - CaseFarmer : 10/2/2010 12:51
        
        Re: Diesel Exhaust Fluid question - tommyw-5088 : 10/2/2010 12:59
        
        Re: Diesel Exhaust Fluid question - canadian farmer : 10/2/2010 13:21
      - Re: Diesel Exhaust Fluid question - jeff gordon : 10/2/2010 19:52
    - Re: Diesel Exhaust Fluid question - Jacob Bolson : 10/2/2010 13:19
      - Re: Diesel Exhaust Fluid question - Maxzillian : 10/4/2010 11:04
        
        Re: Diesel Exhaust Fluid question - Jacob Bolson : 10/5/2010 09:18
- Re: Diesel Exhaust Fluid question - ChrisTN : 10/2/2010 13:27
  - Re: Diesel Exhaust Fluid question - Rich : 10/2/2010 13:28
  - Re: Diesel Exhaust Fluid question - canadian farmer : 10/2/2010 13:42
    - Re: Diesel Exhaust Fluid question - Rich : 10/2/2010 13:54
    - Re: Diesel Exhaust Fluid question - ChrisTN : 10/2/2010 14:11
      - Re: Diesel Exhaust Fluid question - dave morgan : 10/2/2010 19:12
      - Re: Diesel Exhaust Fluid question - jeff gordon : 10/2/2010 19:59
    - Re: Diesel Exhaust Fluid question...Canada question - Ron..NE ILL..10/48 : 10/3/2010 06:42
      - Re: Diesel Exhaust Fluid question...Canada question - Omar : 10/3/2010 07:56
      - Re: Diesel Exhaust Fluid question...Canada question - canadian farmer : 10/3/2010 15:10
      - Re: Diesel Exhaust Fluid question...Canada question - jeff gordon : 10/3/2010 16:55
  - Re: Diesel Exhaust Fluid question - cocodrie : 10/2/2010 15:26
- Re: Diesel Exhaust Fluid question - Brad J : 10/2/2010 14:27
  - Re: Diesel Exhaust Fluid question - ksdave : 10/4/2010 01:41

auto transmissions in straight truck? - rbrfrm : 10/2/2010 10:33
- RE: auto transmissions in straight truck? - Ed Boysun : 10/2/2010 11:11
  - RE: auto transmissions in straight truck? - blr : 10/2/2010 12:59
- RE: auto transmissions in straight truck? - Indianajones : 10/2/2010 16:37
- Re: auto transmissions in straight truck? - nebfarmer : 10/2/2010 22:54

9610 Cylinder speed erratic going down the road - JD fanatic : 10/2/2010 09:50
- Re: 9610 Cylinder speed erratic going down the road - Lil' Hoss : 10/2/2010 10:02
- Re: 9610 Cylinder speed erratic going down the road - BSchroeder : 10/2/2010 12:17
  - Re: 9610 Cylinder speed erratic going down the road - JD fanatic : 10/2/2010 14:18
- Re: 9610 Cylinder speed erratic going down the road - nar : 10/2/2010 22:19

Our 9570 corn settings - dewgubbe : 10/2/2010 09:47

Is a true tandem the same as a disk? - gsi : 10/2/2010 09:33
- Re: Is a true tandem the same as a disk? - Kooiker : 10/2/2010 09:43

some harvest pics from South Sask. - jorlan : 10/2/2010 09:22
- RE: some harvest pics from South Sask. - ne_mn : 10/2/2010 09:30
- RE: some harvest pics from South Sask. another one - jorlan : 10/2/2010 09:34
  - Re: some harvest pics from South Sask. - himie/26 : 10/2/2010 10:21
    - yield,land cost,acres?? - redoak : 10/2/2010 12:50
- RE: some harvest pics from South Sask. - jeff gordon : 10/2/2010 13:17
  - Re: some harvest pics from South Sask. - Grow : 10/2/2010 21:16
    - Re: some harvest pics from South Sask. - jorlan : 10/3/2010 09:25
      - Re: some harvest pics from South Sask. - 9120 : 10/3/2010 17:09
        
        Re: some harvest pics from South Sask. - jorlan : 10/4/2010 09:34

Jump to page: < 8409 8410 8411 8412 8413 8414 ... 8415 8416 8417 8418 8419 8420 8421 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)