|
NECIL | I just set the tractor brakes when I’m loading. When I loading out of the bin I load the front pile as big as I can before pulling up a set of bows to the middle of front hopper and run air up to about 50 before pulling all the way to the back of the back hopper. I fill the far back of the trailer as full as I can before backing up to center of back hopper then walk back to air gauge in trailer. When trailer gauge is at 68ish psi I walk over to shut down the bin, auger and tractor. With a 10” swing away I’m usually in the same ballpark all the time. Once you get a rithym down it’s a cake walk. I’ve gotten back to back loads with the same net bushels several times. One day I had net bushels on 3 loads within 5 bu top to bottom.
 (46B7E7B3-E3E0-4053-A463-ACB75D8E4783 (full).jpeg)
 (766DC4B8-493C-4152-9B86-759BAC7F80E0 (full).jpeg)
Attachments
----------------
 46B7E7B3-E3E0-4053-A463-ACB75D8E4783 (full).jpeg (161KB - 103 downloads)
766DC4B8-493C-4152-9B86-759BAC7F80E0 (full).jpeg (182KB - 102 downloads)
| |
|
Honest survey
