Posted 8/21/2006 10:09 (#37620 - in reply to #37586) Subject: Re: RTK.............Strip till, etc?
NE SD
Brian,
We will be pulling it with a 9420 Deere and eventually a 95x0 or 96x0. I would suspect our goal depth to be 8" or so. Anything deeper than that should be ripper material should it not? Blujet folks tell me worst case scenario that they've seen they need 17hp per shank at 5-6 mph. That does have me worried in some of our tight soils but I hope to help that with some deep ripping as well. What do you get an acre if you don't mind me asking? Seems to pull them at the depths you're talking you would have to charge more too.
I'm kind of getting the same feeling about RTK myself. Seems that unless you have RTN towers in the area being spread out is a pain in the rear.
RTK.............Strip till, etc?
