|
North Carolina | I have a 800 cyclo. Your planter is way advanced compared to mine but is of same design Took me awhile to figure it out when that happened to mine but you probably have a bent gauge wheel arm Tough to see it because the bend just enough to let trash to start going in between opening discs and wheel I’ve bent several in the same position as yours Had to take one off of another unit that I knew was good and compare side by side to see it I also did as you and removed the shims to get it closer to opener to close gap but that doesn’t work Mine was more of a twist type bend but was evident when I compared side by side. | |
|