AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader Versa Moisture Meter
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
KMech
Posted 8/2/2020 09:42 (#8410441 - in reply to #8410298)
Subject: RE: Follow Up: Ag Leader Versa Moisture Meter


Missouri
tedbear - 8/2/2020 07:29
I believe this to be correct although I have no experience with the Hydraulic Seed Modules
.


I can confirm that one from first hand experience. In fact, all the ones I listed I've seen personally.

It's just trivia at this point, but Kinze Planter Monitor Modules are interchangeable because, electronically, they all have the same serial number (1). This leads me to believe the other seed monitor module (STMM) is very likely serial specific configurations. I do know, in general, in the configuration setup screens there is a spot that will list the module serial numbers that pertain to a configuration. On a freshly programmed configuration, it will say, "unassigned" in the serial number location, until that config is loaded to the run screen, at which time the module serial number(s) get "locked in" per se.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)