|
Arva, Ontario | Very helpful.
OK, I have no light.
I have power to the module -14ish volts with engine running.
I have voltage in the CAN between green and yellow that is fluctuating and in the mV range - gets up to 10mV down to near nothing...
Traced cables on machine back to display harness and while not certain, am confident that nothings pinched or mouse eaten in some of the bundles.
I also have power in the battery power cable going into the control plug of module.
Are these modules probe to failure? Simple swap out of I can locate one?
Many thanks,
Ken | |
|
Ag Leader Versa Moisture Meter
