|
Central SD | I battled this 3 yrs ago with a Raven 410 receiver. Everything on the GS2 worked fine as long as I was getting my NMEA with WAAS. As soon as the Omni* would converge to XP or HP, I would lose GPS on the 2600. I guess they still haven't addressed the issue.
I can't remember exactly what JD wants to see for the 0,1,2 value you mention above, seems like either 0 or 1. So when 2 was the value sent - caused problems.
I was hooked up to a laptop watching the NMEA strings come in, and as soon that # changed - blip - no gps.
Edited by Kamp 3/10/2010 15:27
| |
|
Trimble 332 XP - NMEA to GS2 Problems
