AgTalk Home
AgTalk Home
Search Forums | Classifieds (28) | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble 332 XP - NMEA to GS2 Problems
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 3/10/2010 10:35 (#1113652 - in reply to #1113459)
Subject: Re: Trimble 332 XP - NMEA to GS2 Problems


Near Intersection of I-35 & I-90 Southern Mn.
mx270a - 3/10/2010 06:43

On a 252, OmniStar XP and HP are both reported as type 4 (RTK) in the NMEA sentences. If you have VBS configured as a backup, VBS will be reported as 2 (DGPS).

You should be able to see this in the data when you have a laptop connected and hyperterminal open.

FYI, Firmware version 3.70 is out.


Since a 332 probably behaves like the 252, I'm assuming that Omni will be reported as type 4 which seems to be a problem for the Deere stuff. If VBS will report as a type 2 could Brahe purposely configure the 332 for VBS only as a test to see if this in fact the problem?

If this turns out to be the case then it would seem that the 332 is not going to work out for this situation.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)