Posted 6/1/2009 21:32 (#729592 - in reply to #729479) Subject: RE: Feeder house check up.
Nevada, Iowa
Your new bars will have one larger metric bolt per spider, old ones had two. I would take off the feeder house but if you don't use the panel on top, much more room than the rock trap. Last time we pulled ours we used a three point round bale fork. Used a come a long to hold the back of the feeder house to the top mast on the fork. Worked real well, probably took about 45 minutes for one guy to remove.
9500 Rasp Bar Replacement and other inspection
