Posted 4/13/2023 08:06 (#10184360 - in reply to #10179812) Subject: Re: MT Challenger,Help!!!!!
North Idaho
Well I think we found my issue yesterday. The plug that goes into the translator under the seat, had the green or yellow pin pushed out a little so it wasn't making contact. These pins are 48 and 58 in the translator plug. I would guess, if you had no J1939 codes before the translator update, I think your issue is the translator harness under the seat or in the vicinity. There is 2 can networks on these tractors, the Cat data link and the CAN data link. I now have no codes on the tractor and the trimble 750 is no longer throwing a code, I have not tried the autosteer yet but I will let you know.