|
| Still trying to solve problem with my MT's isobus/canbus.I don't seem to be getting the correct voltages on the can hi and lo wires or the red power wire in the round service plug in the fuse compartment.Closest dealer's don't seem to know what it could be,I'm starting to wonder whether its a dodgy translator ecm.Have re-loaded the latest software and Class 3 is enabled,have also checked earths and continuity to rear iso plug,fuse and relay in fuse box F are fine.
Has anyone got any other ideas or know a good challenger service guy,from what I can gather dealer's here in Aus. seem to think they're wasting time talking to Agco,pity Cat doesn't still service these machines.
This is really driving me nuts,any help much appreciated!
Jack | |
|
|
MT Challenger,Help!!!!!
