|
Hendricks MN | I have fought one on and off for a couple of years. One thing that helps is take the drive chain off and spin the reel, bad crank arms show up with the chain off. The biggest thing I found on my reel was two rows of teeth were over close to a half inch from the rest making the cam wheels push on the track. Once I pulled the two bad rows over the reel ran a lot smoother. Another tip is the top rails can be switch side to side to move the wear spots and get a little more life out of them. | |
|
HCC Orbit Reel - Steel vs Plastic Track - Throwing rollers / bending crank arms
