Near Intersection of I-35 & I-90 Southern Mn. | That would certainly explain things. While installing a homemade signal light system on my Ranger this morning, I ran across a channel one harness that I had made to use with an NH3 bar that I no longer use. I purposely checked location #6 and there was no pin in mine. I had actually made this harness myself and it contained only the three wires for the flow meter and the two for the control valve. Pin location #6 had a dust plug in it.
If you have a wire in location #6, I would either remove it or insulate it so that it does not short out to ground. |