|
| I had a similar problem on an Astro cabover. Someone previously had put a smaller pin in the linkage (had a cable going to the clutch arm) and the arm did not wear very well. I had enough room to drill, ream, and install a bushing. I didn’t have a second connection point to work with though. Plus when you drill it removes material possibly making the arm weaker and you are traveling way farther from home than I ever did.
If everything is functioning properly my guess is that’s the answer to your question right there.
Edited by J,ReinkeFarms 2/18/2019 08:05
| |
|
Peterbilt clutch linkage?
