|
Illinois | Does wire size change when going from single phase to three phase?
I know this isn't right but could I use two lighter wires in place of one heavier wire? Heavy wire doesn't have enough flex for the junction boxes I have. I have been to a couple of supply houses and this is the biggest they have.
This is going from the breaker to the switch through an outlet and onto a 15 hp truck auger. From the breaker to the switch and outlet is less than 3 feet of wire. The amps are hard to read on the data plate but I would assume it to be around 50.
Thanks
Edited by AGDEAL 2/13/2019 19:48
| |
|
Wire size for three phase
