|
| I believe there are no subsciption fees with RTK right?
No unless you subscribe to an RTK Network.
I have a GS2 system, so will I have to update the software or components? (reciever, screen, etc.)
At a minimum you will need to buy an RTK activation for each SF receiver and a radio. This assumes you are at the AutoTrac SF2 level.
Are differnt RTK systems compatible with eachother? (eg. JD/Outback/Trimble)
No they are not compatible.
Can I run an unlimited number of ATU's off one RTK base?
Yes.
Is the range of the RTK base line of sight only? What can I expect for a range?
Line of sight to the RTK base station is necessary. Deere says 12 mile range for 1" accuracy 68% of the time if the vehicle has a SF iTC receiver. Signal distance varies but accuracy degrades the farther the signal travels.
I think I heard about signal repeaters to send the correction to other ATU's is this an added component?
A repeater can be used to fill in blank areas in a field.
When you move the base station to your next field, how long does it need sitting still to start sending you a good signal?
Deere has a quick survey mode if you do not want repeatable accuracy or absolute survey mode for repeatability. This assumes the receiver returns to the exact same location each time.
Edited by GPSNUT 6/4/2008 11:59
| |
|
RTK what does it cost?
