I have a new fence that I was considering adding an electric wire to the inside to keep the cattle off of the barb wire. Mostly metal T posts. Total length of electric wire would be about 3/4 to 1 mile. I am not at all familiar with electric fencing but have looked at a number of different types. This would be a "permanent" wire about 5" inside the 5 strand barb. Fence goes up and down rolling terrain so want to keep cattle off of it as much as possible. Should I use the standard solid all-metal wire or one of the more visible white braided wires? Looks like the braided would not be as durable nor conductive. Looking for 6 joules. Mostly Herefords. Any particular wire brands or types to look for? How high off of the ground would you put the electric wire? Another question, I have a lane about 16 ft wide to get from one pasture to water, 5 strand barb on both sides. Any problem putting electric on one or both insides of lane? One side is a perimeter fence. Jim at Dawn
Edited by Jim 5/8/2007 00:39
|