AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Category 3 lower link pins, Horsch disk
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Mark in NEMO
Posted 4/8/2021 10:54 (#8939708)
Subject: Category 3 lower link pins, Horsch disk


Northeast Missouri
I need Cat III lower link pins for a Horsch MT-13 mounted disk. I'd have thought Cat III lower link pins would be easy to find...they're not!

These are clevis type pins (just like a drawbar hitch pin). The problem is finding something 1 7/16" diameter (I need 7+ inches of usable length, but that shouldn't be a problem if I could find something--even a grade 8 bolt--in 1 7/16" diameter.)

Checked lots of dealers, etc., and found nothing. Finally called a Horsch dealer...and they get $142 *apiece* for them!!

I'd appreciate any ideas or leads.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)