|
| Hello everyone.
Have a situation with a John Deere AUTOTRAK implement steering systerm with 2 x SF6000 receivers. We would like to use NMEA from the second display for a 3rd party application. It appears that there is a loop wire in the implement receiver harness between TX and RX serial connection. When removed this affects the tractors recognition of the unit as a "implement" receiver.
The GEN4 displays indicate that Serial NMEA can be selected in the implement antenna.
There appears to be an extra 4 pin round plug under the front lip of the sf6000. I am wondering if this can be used for NMEA2000?
Is there another way to get serial NMEA out of the seceond SF6000 antenna?
Is there another way of getting NMEA0183 or NMEA2000 from the rear antenna at the tractor end?
Any help would be appreciated. | |
|
John Deere SF6000 implement antenna
