|
SEMN | Run older equipment or have your own manuals and troubleshoot/ repair your own equipment on your own time? Those are really the only two options. Had A 3 year old machine start to act up this year, no problems prior. After a long day dedicated to the issue it was a deutsch pin that wasn’t locked in from day one. Wedge was installed but wire wasn’t pushed far enough into connector to trigger lock tab. Pin would break connection for a slip second if bump was hit just right. Could trouble shoot all day checking voltage because it would make contact enough again after that quick jolt. No emission and no can bus makes electrical a lot easier and cheaper | |
|