|
Southern Idaho | Thank you for your help.
1. Yes I believe my flowmeter has been calibrated or is close anyways. For my raven flowmeter the number was something like 710 pu/gal. I ran the calibration by measuring output from the nozzles and it changed it to 714. I'm not sure about the multiplier though?
2. I tried changing it to bypass and you may be right. I still couldn't get it calibrated though. Now when I change the rate it will go up and down(It is definitely opening and closing the valve somewhat) but it will only stay between around 14-19 gpm. I tried the auto-tuning and it only got so far and then gave me a failure message.
Edited by beebe44 4/15/2019 22:04
(IMG_20190415_202954003_HDR (full).jpg)
(IMG_20190415_201103056_HDR (full).jpg)
(IMG_20190415_200306480_HDR (full).jpg)
Attachments ---------------- IMG_20190415_202954003_HDR (full).jpg (117KB - 41 downloads) IMG_20190415_201103056_HDR (full).jpg (77KB - 38 downloads) IMG_20190415_200306480_HDR (full).jpg (90KB - 39 downloads)
| |
|