NoDak | ontpete - 6/29/2018 05:10
The only thing we have to remember is to start tractor first and then turn AL display on.
- I do not know what the error code means but as related to above-
This is how it is with Agleader in the new Kubota M7 series. There's 3 components that are on or off- tractor, display, and roading switch on side dash. Start with all 3 off or at least the roading switch and display. Power display on and make sure controller is powered and fully communicating before turning side dash switch on. Usually waiting a few minutes between each "power on" is enough. If not enough time is given, problems will arise and autosteer will not work. I believe they are working on making this not so finicky this with an update.
|