|
nw NC | Here are pictures of my installation of same box as yours . I used some steel flat bar stock and welded it into the shape of letter " I ". After welding it I laid the box on the steel " I " and used the box mounting holes to pattern where to drill holes in the steel . Also drilled three holes in the vertical portion of the " I " for holes to use lag bolts to fasten " I " to pole. Attached " I " to pole then mounted box to " I ".
Your power distribution looks to be under ground. Our power distribution is all overhead lines, hence power out of my box being routed out the top of the box .
The pole is ours although it was set by power company a L-O-N-G time ago. Power company does not allow mounting of meter or any customer equipment to any of their line poles. Main power pole with transformer stands ten feet away.
Edited by WJKEIGER 9/20/2017 11:38
(019 (Large).JPG)
(021 (Large).JPG)
(022 (Large).JPG)
(033 (Large).JPG)
Attachments ---------------- 019 (Large).JPG (157KB - 21 downloads) 021 (Large).JPG (95KB - 21 downloads) 022 (Large).JPG (110KB - 19 downloads) 033 (Large).JPG (180KB - 21 downloads)
| |
|