|
IA | I have the intellislope connected to port C and the beacon to port B. This way I don't have to connect it to a computer after it is configured the first time.
I have this 6500 connected to our tile plow, the survey stick in the link above, a boundary making rig so we can make boundaries with a InCommand 1200 and a 20/20 at the same time, and our combine for logging yields with our 20/20 and RTK.
Once port C is set it won't change. And if you need to configure port B for something else and want to switch it back to external RTK you can do it with your Ag Leader monitor.
Edited by REVBCO 5/1/2017 10:40
| |
|