|
Pennsylvania | I'd run 36 hole disks, make sure chains are oiled and not stiff, keep short motor drive chains tight at all times, run 20 in h20 and make sure the seed tubes are ligned up with the meter. Take the cover off the meter and lock it in place. Somewhere around 2010 they had issues with some meters sittng slightly forward. The edge of the seed tube was inside the opening of the meter. The seed could bounce on the edge of the tube and mess up spacing really bad. Make sure your software is up to date. Graphite keeps seeds flowing and also lubes the seed plat so it turns smoothly in the meter. | |
|
Case IH 1245 Early Riser Spacing Issues
