|
Rivers, MB | Chad,
I'm running a 4700 with the swath control. I did have the turn on at 2 sec. and the turn off at 1 sec. Today, I played around with it and found that if I lowered the turn on to 1 sec, it seemed to turn the boom on a little sooner so that the coverage map showed a little more overlap coming off the headland.
I have also experienced the same as what you are describing. Sometimes, I will swing the boom over a "miss" on the map and I can see the correct boom turn on but it will not "paint" it on the coverage map. Last year, if you would swing over the miss a second time, the boom would then not turn on so it seemed to record that the area was sprayed, just not show it on the coverage map. This year, the boom will sometimes turn on again and spray the spot a second time. Not sure what is causing that. I think there are still some glitches in the software but I can't say for sure. | |
|
47x0 Swath Control Settings
