|
CENTRAL ILLINIOS | Dont know too much about the hydraulic drive, I have ground drive. One thing about switching from tilled to untilled is the ground drive will drop higher pop on the untilled with the same sprockets just because the drive wheel slips some on the tilled ground. Also take a look at one with ground drive - a lot of chains to oil. Not trying to put down the ground drive - I would go with it again but for some the hydraulic may be better. Make sure you have enough remotes to run it if you go hydraulic. Don't know about the e-sets I went with the pro max40. Wish I would have looked at the e-sets a little harder. | |
|