AgTalk Home
AgTalk Home
Search Forums | Classifieds (116) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader GPS 7500 speed output setup
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 1/31/2023 10:24 (#10070312 - in reply to #10070062)
Subject: RE: Ag Leader GPS 7500 speed output setup

Near Intersection of I-35 & I-90 Southern Mn.
Ok, I may be good to go then. A Raven speed cal of 600 would agree with my previous experience so that agrees with my thinking. You may need to tweak the 600 speed cal slightly but you have plenty of room to try different numbers to bring it in even closer.

Raven systems multiply the pulses received by the speed cal you are using. If the speed and area shown on the Raven are a bit low, increase the speed cal by the Per Cent you are low. For example: 100 acre field, Raven shows 90 acres. Increase speed cal by 10% so try 660. This is an example and I doubt if you will be off that much.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)