AgTalk Home
AgTalk Home
Search Forums | Classifieds (5) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader GPS 7500 speed output setup
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
redpower
Posted 1/25/2023 10:26 (#10058930 - in reply to #10058674)
Subject: RE: Ag Leader GPS 7500 speed output setup



cmetzg - 1/25/2023 07:30

Ok, thanks for the info! I’m guessing that I just need to turn that output on. I wondered if that could be the case, but I had been through all the settings and the manual and didn’t see anything obvious.

Can you share the actual command that needs to be sent, or should I contact a dealer?

I figured that I’d need to adjust the speed cal # in the Raven, I was just surprised to have no signal.


Enter these two commands:
RADARCONFIG ENABLE 36.11 5Hz 500 5
SAVECONFIG

FWIW, Radar Speed output should be enabled by default.
You could try to "Reset to Defaults" from the GPS setup menu, that would also enable it.

Edited by redpower 1/31/2023 08:12
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)