|
| I was trying to flush out the booms and couldn't get the booms to turn on. Right now when I turn the spray booms on with the master switch (rate set to manual with or without a manual speed set), the boom valves don't run and the hagie boom lights come on (usually turn on when a boom section turns off when using autoswath). Does anyone have a good schematic for the hagie boom valves and indicator lights?
It appears that the liq and aux modules are working on the diag screen. My setup uses the hagie boom switches with an interface box and has a raven adapter harness that goes to the hagie boom/flow meter harness.
I'm hoping to see what circuit controls the boom lights to see what is keeping the booms from turning on. Thanks
PS: I don't think it matters, but my pump was stuck (bearing stuck and some foreign material in the pump) so I had no water flow. I do not think the system needs to see water to turn on the booms but I could be wrong. | |
|
Hagie sts12/integra DC problem
