|
Coles County, Illinois | For the ZED_F9P U-center running on Win7 is pretty flaky. Many times I've changed a setting going thru MessageView>UBX>CFG sent send saved config then pushed the reset button and found that nothing changed. What seems better but not fool proof is removing jumpers and going thru Generation 9 Configure View>Advanced Configuration > Reset to default> Change Baud> Then send the whole configuration file with edits to the board.
With S-Center For the ODIN side I send files from the top menu file tab. Download Configuration. Again each time I'm removing jumpers going to a default and com settings then sending a new config file.
Zed configs are UBX commands sent thru U-Center like:
RAM CFG-MSGOUT-RTCM_3X_TYPE1230_UART1 0x5
Flash CFG-MSGOUT-RTCM_3X_TYPE1230_UART1 0x5
ODIN configs are AT commands sent through S-Center Like:
AT+UMRS=19200,2,8,1,1,1
AT&W
AT+CPWROFF
The earlier posters probably know much of this but I want to document some stuff for future searches.
| |
|
C099-f9p support Thread
