|
Westport, IN | My C099 F9P sent data to my Versa that was hardwired.
I used an Arduino shield and it was plug and play one I got my baud rates straight.
https://www.tinyosshop.com/arduino-rs232-rs485-shield
Cost looks to be $13 or so.
Wiring will be made neater before calling it finished.
Used a voltage regulator to drop the tractor voltage to 8 volts. Then this feeds into the v+ terminal which is supposed to be 5-12 volts. I didn't want high from alternator, battery charger or other to reach the ZED.
This was supposed to be my finished box, but it won't be tall enough for the ZED and Arduino shield mounted together.
Edited by Rod Maker 3/28/2020 20:51
(KIMG0490 (full).JPG)
(KIMG0489 (full).JPG)
(KIMG0483 (full).JPG)
(KIMG0486 (full).JPG)
(KIMG0487 (full).JPG)
(KIMG0488 (full).JPG)
(KIMG0484 (full).JPG)
(KIMG0485 (full).JPG)
Attachments ---------------- KIMG0490 (full).JPG (132KB - 137 downloads) KIMG0489 (full).JPG (141KB - 126 downloads) KIMG0483 (full).JPG (80KB - 145 downloads) KIMG0486 (full).JPG (109KB - 154 downloads) KIMG0487 (full).JPG (140KB - 111 downloads) KIMG0488 (full).JPG (125KB - 146 downloads) KIMG0484 (full).JPG (133KB - 140 downloads) KIMG0485 (full).JPG (127KB - 119 downloads)
| |
|