|
Westport, IN | My C099 F9P sent data to my Versa that was hardwired.
I used an Arduino shield and it was plug and play one I got my baud rates straight.
https://www.tinyosshop.com/arduino-rs232-rs485-shield
Cost looks to be $13 or so.
Wiring will be made neater before calling it finished.
Used a voltage regulator to drop the tractor voltage to 8 volts. Then this feeds into the v+ terminal which is supposed to be 5-12 volts. I didn't want high from alternator, battery charger or other to reach the ZED.
This was supposed to be my finished box, but it won't be tall enough for the ZED and Arduino shield mounted together.
Edited by Rod Maker 3/28/2020 20:51
 (KIMG0490 (full).JPG)
 (KIMG0489 (full).JPG)
 (KIMG0483 (full).JPG)
 (KIMG0486 (full).JPG)
 (KIMG0487 (full).JPG)
 (KIMG0488 (full).JPG)
 (KIMG0484 (full).JPG)
 (KIMG0485 (full).JPG)
Attachments
----------------
 KIMG0490 (full).JPG (132KB - 168 downloads)
KIMG0489 (full).JPG (141KB - 155 downloads)
KIMG0483 (full).JPG (80KB - 177 downloads)
KIMG0486 (full).JPG (109KB - 186 downloads)
KIMG0487 (full).JPG (140KB - 137 downloads)
KIMG0488 (full).JPG (125KB - 173 downloads)
KIMG0484 (full).JPG (133KB - 176 downloads)
KIMG0485 (full).JPG (127KB - 148 downloads)
| |
|
C099-f9p support Thread
