|
south africa | I'm also to busy, although it's trying to keep my boom from touching ground! Finishing this project is more important than the time it's done in. As long as everyone keeps interest and do what he can, when he can, we'll get there. Giving up is the worst way of loosing.(although I think running out of $ is worse )
I need to know more about everyones sprayer setup, to make things clear.
I have old pull type :
The whole boom is connected to the centrepiece and is moved with 1 cylinder and one remote
The 2 wings are moved with 2cylinders, 1 for each wing, but get oil from only 1 remote through a electric selector block operated with buttons on a joystick.
My plan is to give each wing its own electric remote, because the1remote cannot supply enough oil to lift both wing quick enough at the same time (piping to thin too)
That leaves me with 3 electric remotes and 6 inputs and outputs like WildBuckwheat
It's not really necessary for my centrepiece to be outo as it is close enough to wheels, but since where at it , why not!
But if I understand correctly, the uno would be okay if one are to make only the wings automatic. And that it would be easy, code wise , to change to mega if one should decide to go with auto centrepiece later on ?
In what way is your hydraulics different? | |
|
DIY auto boom height control
