|
NE Alberta | Agleader lists the Raven calibration as 16mV/psi (and Raven calls it a 250psi unit).
The one I linked to lists its output (the 300 psi version):
0 psi outputs 0.5V (500mV)
150 psi outputs 2.5V (2500mV) so using the Raven calibration of 16mV/psi: 16 X 150 = 2400mV or 2.4V would make it not exact but similar to the one I linked.
300 psi outputs 4.5V (4500mV) so using the Raven calibration of 16mV/psi: 16 X 300 =4800mV or 4.8V
The one I linked to claim the voltage output is linear, but I do not know what the output at 60-80 psi (typical of what I use) would be. I would guess that at those pressures the 200 psi unit would output slightly to much one way and the 300 psi unit would output slightly to much the other way. I have no idea if the Raven unit is 16mV/psi throughout the pressure range, and without knowing that it is hard to guess.
Edited by rocker 2/10/2019 19:35
| |
|
|
Integra, Direct Command and pressure
