|
Missouri | gemarsh - 2/9/2019 09:01
Thanks for the response. I'm a self taught sprayer operator. The OEM setup in the spra-coupe had an audio alarm go off when the system had zero pressure.
Are you sure that alarm was zero pressure? We used to have a spray coupe that had a Raven. It alarmed when the tank was empty, but that was not a zero pressure alarm. It was an incorrect (zero) rate alarm. The Ag Leader will give a rate alarm, but it occurs on a 4 second delay.
If you must run your tank fully empty, when it's near empty, change to an as-applied map type. Set reasonable values for your map legends, and you will see your map color change sooner than you will see any other indication (except possibly the analog pressure gauge).
Even if you set it up to monitor pressure, I think it just displays it in the corner of the screen, I don't think you can set an alarm condition for it.
Edited by KMech 2/13/2019 06:41
| |
|
Integra, Direct Command and pressure
