AgTalk Home
AgTalk Home
Search Forums | Classifieds (72) | Skins | Language
You are logged in as a guest. ( logon | register )

XCN-2050 External receiver settings Trimble guys I need help!
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Dogface1SG
Posted 2/19/2021 14:22 (#8844868 - in reply to #8844535)
Subject: RE: XCN-2050 External receiver settings Trimble guys I need help!


NW Ohio
I am not really following what you are trying to do. Are you going to do a classic AP setup? I am assuming you have a 372 feeding the NAV. My guess is a Pro 700 is connected to the NAV and conducting steering currently.

If you are just trying to port in NMEA data, it really isn't that difficult on the 2050 using the FMX+ app. Connect the EXP, set it up in settings/system/ports if I remember correcty. When on that screen, there are like three different ways you can set it up. Each one gives an explanation of how it is being setup in reference to how it was used on a FMX. You will set it up so it acts like port A/B as this is where you would port in generic NMEA. Make sure your baud and 8N1 match and you should have it.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)