Northern Illinois | Our S is getting close. If you do have to take the feeder house don't sweat it, off its a 20-30 min. job. Hardest part is getting the left cylinder out because of the reverser. Use a small pry bar with the bent end and large nuts as shims/spacers to pry on You can flip it up on its nose. If on a S take a pic and mark the harness routing to the valve and mark the plugs.
Edited by biggrntractor 9/28/2020 08:22
(IMG_3593 (full).JPG)
Attachments ---------------- IMG_3593 (full).JPG (189KB - 57 downloads)
|