|
North Central Indiana | I have a cfx750 running an ez steer and inputting gps to my pro 600 in my planter tractor. I have installed a microtrak gsc1000 rate controller. The cable from the port a of the cfx750 is #75742. I believe pin 2 on port a is the radar output and it goes into a 12pin deutsch plug and then into the harness via a pink wire. On the other end of the harness is a 12pin deutsch shroud with a pink wire going into pin 2. Is this the same wire? If it is I would like to fab a cable to go to microtrak. The microtrak end has a 3pin metripak plug and my needed cable would need a 3 pin shroud on that end. Anyway, that's what I would like to accomplish unless someone can give me some insight on an easier way. TIA | |
|