|
NE Indiana | You can with a special cable but I believe it’s either the COM port or AUX, you can’t output on both. If you are obtaining your location for DigiFarm via your 500 or your tablet is displaying RTK status, satellites, correction age, etc that info is coming out of your COM port. Switching to AUX would turn these features off.
I missed the fact that you mentioned autopilot. As mentioned above it would probably be best to pull the data out of your NAV instead of your 500. There should be a cable you can buy for that. | |
|
GPS signal from EZ Guide 500 to Ag Leader Insight
