Posted 9/7/2020 20:30 (#8481764 - in reply to #8480891) Subject: RE: GPS signal from EZ Guide 500 to Ag Leader Insight
NE Indiana
Thinking about this a little more.... Are you using the DigiFarm beacon? If so, I’m guessing this is connected via the serial port on the 500 so there probably is not a cable out there to purchase that will have the Tx and ground wires split. I think you’ll have to make your own cable as we did. I could help but you’d have to provide some info from the existing cable as I’m not familiar with the pinout for the beacon.