|
sw wisconsin | boog I should add that this inductor Is downstream from my water pump, I assumed that I need water flowing thru the venturi to get the suction I need to pull from the totes , can I run my pump with no water and build suction to pull from the totes to calibrate, this is just a meter with no pump. I am injecting the chemical into the water as it pushes it thru the venturi then to the sprayer. I don't think I can run the water pump dry and create suction to pull chemical from the totes but maybe I can first time using an inductor like this downstream from the water pump. | |
|
how to calibrate soltera electronic meter after the water pump
