|
Creighton, NE | Devin,
This is how I set my planter up with an implement switch on a 1770nt. This location is totally dependant on the raising & lowering of the frame and is not affected by any movement of the row units. I think this particular switch came with the rawson setup but any wisker switch would work that you can wire NO or NC.
The switch you're describing on the wing lift cylinder is probably for the marker cycle and I don't think you want to tee into that circuit. Depending on how the switch is setup, maybe you could get another one and put on the other wing lift cylinder to use for the seed command
 (IMG_2263 (Small).JPG)
Attachments
----------------
 IMG_2263 (Small).JPG (50KB - 74 downloads)
| |
|
JD implement switch on Insight
