AgTalk Home
AgTalk Home
Search Forums | Classifieds (158) | Skins | Language
You are logged in as a guest. ( logon | register )

No start chainsaw
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
MW farms
Posted 4/6/2020 22:46 (#8170671 - in reply to #8170651)
Subject: RE: No start chainsaw


clevepreach - 4/6/2020 22:37

I just have to brag a bit. I have a Stihl 031AV that I bought new in the fall of 1977. It has been sitting on the shelf or close to 10 years. Got it out last Thursday, poured all the old gas out of it, and put in fresh (I always use treated gas, either Sta-bil or Star Tron - the blue stuff, for what that's worth). Pulled the starter cord a few times. Didn't start. Checked the plug. Good spark. Shot one squirt of starter fluid in it (I know, not supposed to use that on a two cycle). Started on the third pull. I then used it to do some trimming on a down tree. I did have to run it for awhile before it really smoothed out and ran as it should but for a 43 year old saw that ain't bad. I did have the ignition replaced with an electronic ignition about 20 years ago, so that might have helped.



You realized you just jinxed your saw.

Our saw wouldn’t start had spark had fuel but wouldn’t fire. Had to rebuild the carb and clean the flywheel up for it to run. The mag was kinda rusty.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)