|
Texas | Usually when I’ve experienced a single bent push rod it was either a valve was stuck or there was a lifter failure.
When multiple bent pushrods occurred, that was from the timing gear breaking.
Sounds like your engine has an issue just on one cylinder if it’s just the one pushrod that keeps getting bent.
Check the valve, valve spring, and rocker arm carefully before pulling the head.
Yep, very well could be valve seat or even pieces of piston causing issues with the valve.
Edited by Pigpiggy 3/29/2020 12:39
| |
|
4cylinder diesel motor clatter-bent push rods-ok ?
