central iowa | oes - 5/19/2019 09:46
Have a New Holland T8.390 running a in command 1200. I have to get it lined back up with the path pretty close or when I go to engage the auto steer it will over correct and swerve erratically trying to get on line. What would you run your numbers on for your adjustments ie line accusation steering aggressive etc? Dealer isn’t much help. Case factory steering on 315 you can just punch the button while turning and it jumps right on line. Thanks
Edit on the three adjustment numbers I think I have on 10 I believe they are steering aggressive, line aqu and whatever the other one is
I cannot help with the actual numbers as that is going to vary with each tractor, but I can tell you to only chance one at a time and move one number at a time (ie 10 to 9 or 10 to 11), then try engaging again to see if it has helped.
Sounds like you need to lower your numbers a bit to slow the system up a bit.
|