saskatchewan and Washington | I did a few minor modifications to my 1135. Put a larger clutch pulley setup on the AC. Worked much better. Machined the front pulleys for the fan drive belts to use wider belts, originals were A section I believe. No fun changing them. Most of these smoke going down the field, a lot. Advancing the timing a couple degrees will nearly stop that.
Hydraulic fill is in a fairly hard to use place, need to make up a hose and funnel to fill, or possibly a pump. The closed centre hydraulic system is a bit complicated.
Batteries are extremely easy to service.
They have a good sized solid cab.
Not particularly fuel efficient, my 1070 case was much more fuel efficient. |